This section contains the manufactures' detailed information on our complete line of new machine equipment. Our company is committed to bringing you only the finest quality new machinery available on the market today. Please take a moment and peruse our new machine catalog list by the manufactures names shown below. If there is a specific brand or model that you are looking for and you do not see it listed in our catalog, please contact our offices directly at (404) 321-3607. We will then locate the product model number for you and contact you with a quote. Call us for more information on our "TRY IT BEFORE YOU BUY IT" policy.

Hot & Cold Automatic Strip Cutting MachineModel: HC-530
A Hot and Cold Strip Cutting Machine for under $3800.00 US. It will cut elastic, webbing (Up to ¼" Thick), Ribbons, Belt Loops, Velcro, Nylon Cords, Leather, Safety Belts, Rubber and Vinyl to name a few.
- POWER SUPPLY - 110 volts.
- FEEDING SPEED - adjustable up to 13 inches per sec.
- CUTTING LENGHT - approx 400 ft.
- CUTTING WIDTH - 4 inches.
- TOLERANCE - .05% of total cut.
- QUANTITY - up to 99,999 pieces.
- COUNTER - pre set up to 99,999.
- SAFETY - knife cover sensor - auto stop roll end sensor.
- AUTO - feed/reverse.
- ALL PARTS AND LABOR GUARANTEED FOR 1 YEAR.
Hot & Cold Automatic Strip Cutting MachineModel: HC-530ES

With our Model HC-5030ES you can cut pieces up to 4" wide and 9" long on demand, no more wasted material, only cut what you need. Here is how it works, as the machine cuts a piece of Velcro or webbing the material slides down the guided track and stops at the edge of the guide, when the operator removes that piece, the sensor (with adjustable delay) sees there is no material in place and will automataically cut another piece. Properly positioned machine can feed 2 operators at the same time. When you don't need the on demand feature the machine converts to a standard HC-530 hot an cold strip cutter.
Hot & Cold Automatic Strip Cutting Machine
Hot & Cold Automatic Strip Cutting MachineModel: HC-530CD
The HC-530CD was developed specifically for government contractors doing name tags. It replaces an operation currently done by hand. With the highest quality sensors our machines are able to determine different color shades, this feature allows you to cut the webbing 3 to 4 inches before the first letter of a name and 3 to 4 inches afte the last letter. The sensitivity of the sensors is adjustable to any color or contrast. Machine available with hot/cold blades.
Model: HC-530LS

Line Sensor Strip CutterModel: HC-530LS
Model HC-530LS is able to detect and cut on line markings.
Model: HC-530A
Pneumatic Hot and Cold Strip CutterModel: HC-530A
With a 4" blade and dwell timer this machine will cut thru heavy webbing, synthetic cord, cardboard, leather, plastic...
Electronic Hot/Cold Strip Cutting MachineModel: HC-810
The HC-810 automatically cuts and seals synthetic materials without fraying. Nylon cord can also be cut. This machine is delivered equipped with a time delay feature which allows the time which the knife is down to be controlled for cutting very thick materials.
Electronic Hot/Cold Strip Cutting Machine
Electronic Hot/Cold Strip Cutting MachineModel: HC-204
All the same features as the HC-810 except it does not require compressed air.
Digital Strip Cutter Machine - 8 inch Hot/ColdModel: HC-861

Same specs as the HC-810 but with 2 heavy duty heating elements (850 watts each) and 2 extra inches. It gives you the capacity to cut more webbing at the same time.
Digital Hot/Cold Strip Cutter Machine
Model: HC-707
Hot and Cold Strip cutter with 9" blade.
Model: HC-976
Our largest (14" blades) Hot and Cold Strip cutting machine.
14 inch Strip Cutter
Cutting Machine for Fillet Hook & Loop FastenersModel: C-918
When you need to cut different shapes of VELCRO, "this is The Machine."
It works like a strip cutter and can be set for different lengths. The great advantage is it cuts the pieces with a die and has many shape options. Should you require a shape not shown we can fabricate the dies to your specifications up to 2" width of any shape. Call us today for your specific requirements.
Model:C-158

Form Strip Cutter
If you need webbing or Velcro with the corners rounded off, or other unique shapes Model C-158 is able to accomplish the task.
Hot/Cold Angle Strip CutterModel: HC-380
This Angle Strip Cutter cuts Elastic, Webbing, Ribbons, Belt Loops, Velcro, Nylon Cord, Leather, Safety Belt, Rubber, Vinyl and Light Gauge Wire. It also is fully adjustable up to a 45° angle.
zing
Hot/Cold Angle Strip Cutter
6 Inch Hot/Cold Angle Strip CutterModel: HC-384

With a 10.75 inch blade and adjustable angle, thre's not much this machine can't do. Fully automatic and easy to operate, will cut the lightest ribbon or the heaviest webbing. With the 10.75" knife you are able to cut 5 rolls of 2 inch webbing at the same time or cut 6" material at any angle you desire.
6 Inch Zig Zag Strip CutterModel: HC-613Z
Model HC-613Z is for when a Zig Zag finish is required.
Zig Zag Strip Cutter
Hot Angle Strip CutterModel: HC-218Z
.jpg)
When you need to cut webbing (hot only) with a zig zag finish this is the machine. All other specs are like model HC-384 and HC-380.
6-Inch Hot and Cold Digital Strip Cutter with Adjustable Line MarkerModel: HC-888

When you need to cut and mark webbing, velcro or any flexible material, our model HC-888 is the affordable machine for the job.
Call us with your special applications.
Digital Strip Cutter with Adjustable line marker
Strip Cutter with Hole Punch CapacityModel: HC-888P
When your requirements demand a strip cutter that not only cuts the material but also punches and seals one or more holes, model HC-888P can accomplish the task.
For a price quote we will need to see your sample.
Model: C-700

7 3/4 Inch, Piece Cutter
Model: C-700
7 3/4 inch Piece Cutter
14 Inch, Piece CutterModel: C-140

This fully automatic 14 inch Cold Cut Machine is fully capable for cutting Paper, Cloth, Leather, Plastic, Cord, Fiberglass, Composite, Cardboard, Velcro and virtually all other synthetic materials.
With the Piece Cutter's simple easy to read instructions and straight forward programming with the electronic control panel, it makes hard jobs seem easy.
14 Inch, Cutting/Unwinder MachineModel: C-126

Two machines in one! A 14 inch blade machine with an automatic unwinder, will handle rolls up to 200 pounds and still maintain precise tolerance. Excellent for cutting rubber, plastics, neoprene, cardboard, fiberglass, paper, etc.
14 Inch Cutting/Unwinder Machine
24" Blade Piece CutterModel: C-1956

When you need to convert rolls up to 24 inches wide into cut pieces, our model C-1956 is the perfect machine for the job. With the adjustable tray , the cut piecs will stack up neatly. And with the built in unwinder even elastic materials will always meet the required tolerances. Able to cut plastic, textiles, elatic, composites, rubber, graphite, leather, vinyl, Velcro, rope, paper, cardboard, etc....even metal shim. 220 volts.
25" Blade Piece Cutting MachineModel: C-1957

Electronically controlled, digital settings for cutting lengths up to 25 inches wide. Cold only. Machine equipped with casters. Will cut: paper, plastic, cardboard, leather, carpet, cloth, carbon fiber, graphite, fiberglass, 1/16" metal.
44" Blade Piece Cutting MachineModel: C-1958

Electronically controlled, digital settings for cutting lengths up to 44 inches wide. Cold only. Machine equipped with unwinder, and adjustable piece tray. Will cut: paper, plastic, cardboard, leather, carpet, cloth, carbon fiber, graphite, fiberglass, 1/16" metal.
Piece Cutting Machine, 44 inch blade
46" Blade Piece Cutting MachineModel: C-1959

Electronically controlled, digital settings for cutting lengths up to 46 inches wide. Cold only. Machine equipped with auto pre-feeder and casters. Will cut: paper, plastic, cardboard, leather, carpet, cloth, carbon fiber, graphite, fiberglass, 1/16" metal.
48" Blade Piece CutterModel: C-1960

When you need to convert rolls up to 48 inches wide into cut pieces, our model C-1960 is the perfect machine for the job. With the adjustable tray , the cut piecs will stack up neatly. And with the built in unwinder even elastic materials will always meet the required tolerances. Able to cut plastic, textiles, elatic, composites, rubber, graphite, leather, vinyl, Velcro, rope, paper, cardboard, etc....even metal shim. 220 volts.
60" Blade Piece CutterModel: C-1961

When you need to convert rolls up to 60 inches wide into cut pieces, our model C-1961 is the perfect machine for the job. With the adjustable tray , the cut piecs will stack up neatly. And with the built in unwinder even elastic materials will always meet the required tolerances. Able to cut plastic, textiles, elatic, composites, rubber, graphite, leather, vinyl, Velcro, rope, paper, cardboard, etc....even metal shim. 220 volts.
Hot (Only) Cutting MachineModel: H-24

Our most economical Hot (only) Machine with an 8" blade and built unwinder.
Hot (Only) Cutting Machine
Rotary Die Piece Cutter - 5 inchModel: 6525-5

The Model 6525 DC Rotary Die Cutting (laminating) and Converting Maching is a narrow web table top die cutter designed to die cut an extremely wide range of materials that consists of different thickness, such as paper, rubber, cork, foam, velcro, medical products and many more.
Model 6525 DC will offer 2 die stations. One of the die stations has a registration adjustment that allows for the dies to be registered with one another. This also allows for tight registration between the die stations. The die stations in the 6525 DC are constructed from heavy rigid aircraft grade aluminum. The lower shafts within the die stations are made from a high grade tool steel and are precision manufactured to assure precision die cutting and long life. Precision bearings ar installed on the lower shafts to give optimum performance. Rotary dies can also be easily and quickly changed in the die stations to allow for quick change over.
Rotary Die Piece Cutter - 10 inchModel: 6525-10

The Model 6525 DC-10 Rotary Die Cutting (laminating) and Converting Machine is a narrow web table top die cutter designed to die cut an extremely wide range of materials that consist of different thickness, such as paper, rubber, cork, foam, velcro, medical products and many more.
Model 6525 DC-10 will offer 2 die stations. One of the die stations has a registration adjustment that allows for the dies to be registered with one another. This also allows for tight registration between the die stations. The die stations in the 6525 DC-10 are constructed from heavy rigid aircraft grade aluminum. The lower shafts within the die stations are made from a high grade tool steel and are precision manufactured to assure precision die cutting and long life. Precision bearings ar installed on the lower shafts to give optimum performance. Rotary dies can also be easily and quickly changed in the die stations to allow for quick change over. Rotary Die Piece Cutter dots Dies
Computer Strip Cutting MachineModels: SM-160
.jpg)
The SM-160 series is designed especially for the U.S.A., E.E.C. and other special request markets. Blade width 160mm
Models with "A" means both Hot and Cold Cut alternatives, hot blade is good for cutting synthetic materials to avoid fraying of cutting edge, maximum temperature approximately 450 ºC.
Swing Fusing CutterModel: P75SH-1600
The MM Swing Fusing Cutter automatically cuts tapes and belts of nylon, polypropylene, etc., with a heated knife. Single swing cutting with one end always kept straight, oblique cutting and straight cutting is freely selectable.
The heat knife swings from 0º to +45º around the center axis of the knife base as a fulcrum. The swing width may be freely adjusted by either bring nearer or farther the stopper relative to the 0º line. Set and fix the stopper at the 0º position for straight cutting.
Heavy Duty 14" Automatic Unwinder / Pre-FeederModel: PF-18
With 2 independent stepping motors, this machine feeds the material and unwinds the roll at the same time.
Auto FeederModel: F-68
This feeder is specifically made for unwinding tubing, rope, wire etc. 2 stepping motors assures you consistency and even feeding.
Auto Feeder
Automatic Pre-FeederModel: PF-33
This automatic pre-feeder was specifically designed to unwind heavy rolls up to 150 lbs. This is the ideal accessory to maintain speed, accuracy and tolerance on your strip cutter.
Belt Cutting MachineModel: BC-49
36 inch wide cutting base with adjustable guides. 220 volts.
Belt Cutting Machine
Model: H-5
.
2" Manual CutterModel: H-2
Machine StandModel: MS-24
This all metal stand with tool box compartment and locking wheels is ideal for models HC-530, HC-5300, 530ES, 530CD and C-918
Precision Cleaner/DegreaserModel: CS290
The most effective way to clean strip cutters, will remove adhesives, dried glue, oil, grease, or any other build up on rollers and knifes (will not damage polyurethane rollers).