JUKI MO-6716DA 5 Thread Safety Stitch Semi-Dry-Head High Speed Overlock Industrial Serger Comes With Fully Submerged Table, Legs, Servo Motor

Best selling machine to eliminate oil stains on the sewing product. JUKI’s cutting-edge dry-head technology has been introduced to the MO-6700S, which has an established reputation for its excellent seam quality and higher productivity.

JUKI’s dry-head technology protects the sewing products from oil stains. Only the parts which mainly contribute to oil splashes are improved to have dry mechanisms to create the semi-dry-head overlock machine, MO6700DA series. The MO-6700DA Series is the best selling machine to eliminate oil stains on the sewing product.

Oil stains on the sewing product are eliminated

• Oil splashes are substantially reduced to eliminate oil stains on sewing products, thereby upgrading the finished quality.
• The frequency of stain removal or re-sewing is reduced.
• The machine achieves a practical maximum sewing speed of 7,000sti/min.

Cutting-edge dry technology for achieving a lubrication-free mechanism

• The needle bar mechanism and upper looper mechanism have been re-designed to require no lubrication.
• The most-advanced dry technologies, such as the special surface treatment applied to the major drive unit and the grease feeding method, contribute to higher durability. The machine does not splash oil after a long-period of use. The grease filler openings are newly provided for the sewing machine on two locations, i.e., one on the upper looper component and the other on the sewing machine frame, thereby improving maintainability.

MACHINE SPECIFICATIONS:

• Model name: MO6716DA
• Stitch Type:  2-needle 5-thread safety stitching
• Max. Sewing speed:  7,000 Stitches Per Minute
• Stitch length:  0.6 ~ 3.8 (4.5) mm
• Needle gauge (mm):  3.0+2.0, 5.0+2.0
• Over edging width (mm): 1.6, 3.2, 4.0, 4.8
• Differential feed ratio: 
  • For gathering 1:2 (Max. 1:4)
  • For stretching 1:0.7 (Max. 1:0.6)
• Inclination angle of the needle: 20°
• Needle mechanism: Lower bushing method
  
• Needle:  DC 27 (excluding some subclass model)
• Max. lift of the presser foot:  7mm (excluding some subclass model)
• Max. presser foot pressure:  63.7N (6.5kgf)
• Stitch adjusting method:  By push-button
• Differential-feed adjusting method:  By lever (with micro-adjustment)
• Weight of the machine head:  28kg
• Lubrication:  Automatic (The needle bar mechanism and upper looper mechanism do not require lubrication.)
• Lubricating oil:  JUKI Machine Oil 18 (equivalent to ISO VG18)
• Needle cooler:  Provided as standard
• Needle thread heat remover:  Provided as standard