FULLY ASSEMBLED - READY TO SEW
Juki LU-1560N 2-needle, Unison-feed, Lockstitch Machine with Vertical-axis
This machine comes with a 1/4" gauge size. If you need a different gauge size, please call us. This Juki two-needle machine is ideal for sewing heavy materials. When the material thickness changes, it utilizes a new mechanism that doesn't change the ratio of the alternate vertical movement of the walking foot or presser foot. The mechanism also prevents slippage between the upper and lower materials when a heavy material is used.
Leather Sewing Machine
The machine is for sewing a range of heavy materials for industrial use, such as cargo handling belts and containers, as well as those for general use, such as car seats, sofas and bags. The torque and foot clearance will allow you to sew just about any leather project.
|Model name||LU-1560N-7, 1561N-7||LU-1560N, 1561N|
|Max. sewing speed||2,500sti/min|
|Max. stitch length||9mm|
|Presser foot||Auto: 16mm||By knee: 16mm|
|Alternating vertical movement||1~6.5mm||2.5~6.5mm|
|Needle||135×17 (Nm160) Nm125~Nm180|
|Thread||#30~#5, B46~B138, Nm=60/3~20/3|
For Sewing Heavy Materials & Leather
Juki's unique feed mechanism promises excellent efficiency of feed. In addition to the standard models of 1-needle and 2-needle machines, other models intended for special purposes are available, including models for extra heavy materials and one having a thread trimmer. The machine is applicable to an extended range of heavy materials for industrial use, such as cargo handling belts and containers, as well as those for general use, such as car seats, sofas and bags, thereby contributing to both improved quality and increased productivity.
Juki LU-1560n FEATURES:
HIGHER LIFT OF THE PRESSER FOOT
The high, 16mm presser foot lift enables easy material handling.
With the adoption of this vertical-axis double-capacity hook, the frequency of bobbin thread changing is reduced, promising sewing work of increased efficiency.
The machine leaves a shorter needle thread after thread trimming, improving thread consumption efficiency. With a rigid knife and improved cam shape, the thread trimmer cuts thread as thick as #5 without fail.
THE AREA AROUND THE NEEDLE ENTRY IS DESIGNED TO BE EASILY OBSERVED
Since the needle thread tension-release solenoid is fitted on the rear face of the Juki industrial lockstitch machine head, the area around the needle entry and one-touch type reverse feed button is easily viewable. This substantially contributes to improved operability.
The stitch length can be easily selected by the stitch dial. The machine is provided with many improved features that offer enhanced operability such as an easy-to-observe area around the needle, placement of the bobbin winder on the front face of the machine arm, and a large handwheel (f 160).
A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. (Machines equipped with automatic thread trimmer are excluded.)
The machine is full-open-type top design makes it possible to fully open the top of the machine arm. Thanks to this design, adjusting works can be done without tilting the machine head.
The machine is equipped as standard with a safety clutch for preventing hook breakage. Reset work can be done simply by pressing a button
Max. sewing speed 2,500 Stitches per Minute
Max. stitch length 9mm (forward/backward)
Needle bar stroke 38mm
Lift of the presser foot by hand 9mm
Lift of the presser foot by knee 18mm
Needle Gauge 4.8mm, 6.4mm, 7.9mm, 9.5mm, 12.7mm (3/16, 1/4, 5/16, 3/8, 1/2)
Alternating Vertical Movement 2.5~6.5mm
Thread Take-Up Slide Type
Hook Vertical-Axis Double-Capacity Hook
Needle (at the time of delivery) 135x17 (Nm160) Nm125~Nm180
Lubricating Oil JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
Bed Size 517 mm x 178mm
Weight of the Machine Head 45kg
- Sewing Machine Brand: Juki
- Sewing Machine Type: Double Needle|Lockstitch