How Will This Machine Help Me?
For Small Design Studios
Sew complex curves without wrestling the fabric.
The
multi-belt feed system actively manages fabric movement through
armholes, princess seams, necklines, and contoured panels—so you’re not
stretching, pulling, or fighting bias and lightweight materials.
What this means for your studio:
It gives you production-level seam control without requiring production-level operator experience — ideal for small teams building refined, shaped garments.
For Technical Outerwear & Stretchwear Producers
Controlled stretch. Stable seams. No feed distortion.
The
synchronized belt feed system regulates fabric tension and feed rate
across curved and eased seams, preventing seam ripple, torque, and panel
distortion common with stretch laminates, softshell, knits, and
performance fabrics.
Operational advantages:
This is especially valuable for:
In short: it removes fabric handling variability from the equation and lets you standardize quality at higher speed.
What the DX-01 will add to my business:
Advantage 1 – Performance Focused
Perfect curves. Controlled easing. No fabric fight.
This
belt-feed system actively manages fabric movement, keeping stretch,
bias, and lightweight materials stable while you sew. Ideal for
armholes, princess seams, necklines, and contoured panels—reducing
puckering, distortion, and operator fatigue while increasing output.
Advantage 2 – Production Efficiency Focused
Consistent curved seams—operator skill no longer the bottleneck.
The
multi-belt feed system controls fabric tension and feed rate through
curves and eased seams, minimizing rework, skipped stitches, and seam
rippling. Expect cleaner first-pass results and faster throughput on
shaped garments.
Advantage 3 – Quality Control Focused
Precision feeding for shaped garments.
Six
synchronized belts maintain even fabric control through curves and
eased sections, delivering smooth seam lines on stretch, bias-cut, and
delicate fabrics. Less distortion, fewer corrections, higher garment
consistency.
Advantage 4 – High-End Brand Positioning
Engineered fabric control for refined construction.
Designed
for garments with contour and structure, this belt-feed system
stabilizes fabric through complex curves and easing—producing smooth,
balanced seams without stretching or compression. Cleaner lines, luxury
finish, faster assembly.
1-Needle Lockstitch Sewing System with Electronic Belt Feed
The World’s First! 6-belt feed-assist mechanism.
Smooth feed adjustment and trial stitching with no unraveling. Significantly reduced setup times.
Comes with the knee presser lifting lever as standard. Familiar operation with new convenience.
Includes: Head, Table, Stand. Fully Assembled
*Fully assembled means the machine is set up, sewn off and ready to use with a table upon arrival.
Looking for financing, click the logo below
[END-SHORT-INFO]
Curved processes like easing are completed efficiently and beautifully.
JUKI developed the 6-belt feed-assist mechanism as a unique “fabric handling” assist technology*1 to streamline work and boost productivity. Automatic calculation and precise control of the optimal feed with six belts arranged above and below ensure the easy handling of difficult processes. The operation is achieved fast and simply by guiding the fabric by hand.
Stable feed force and consistent stitching even at high speeds
The upper and lower belts securely grip even hard-to-feed materials, ensuring strong feed force during high speeds and reducing defects such as skipped or jumping stitches.
Versatile design : multiple functions in a single machine
By attaching the included component? Presser foot joint? to the presser bar, standard presser feet can be installed, allowing for flexible operation according to di erent applications.
Seamless continuous sewing with automatic step switching
Step switching supports both manual operation via the hand switch and automatic operation based on a preset number of stitches. Sewing continues without feed stoppage during step changes.
No oil staining issues
JUKI’s
proprietary lubrication control technology*² enables oil-free operation
of the needle bar, thread take-up lever, and hook area. Oil stains on
sewn products are a thing of the past.
*² J-Dry
Technology (JUKI Dry High-Speed Glide Technology) : JUKI’s unique
design philosophy: not to shield oil, but to eliminate the need for
it.The high-precision design and special surface treatments of the
components reduce wear and extend the operation life by enabling
oil-free lubrication.
Reduced seam ripping during trial stitching
High-precision trial stitching with a minimal risk of fabric damage is achieved by operating only the feed mechanism*1 while securely gripping the fabric between the upper and lower belts. This approach reduces the time spent on seam ripping, an operation that used to take up to three times longer than the actual sewing.
*1 J-DX F Technology (JUKI Digital transformation Feed Technology) : JUKI’s feed technology enables independent control of the feed mechanism and needle bar drive. This technology is the foundation of the 6-belt feed-assist mechanism and new value offered by the DX-01.
Ratio-based input for setting the optimal feed amount
Configure the optimal feed amount simply and automatically by entering the differential value between the upper/lower and left/right belts as a ratio (%) relative to the set stitch length. Fine-tuning the feed with the [–] and [+] buttons is as easy and intuitive as using a dial. The on-screen illustration changes in real time according to the input values.
One-touch reversal of left /right sewing patterns
There’s no need for pattern re-entry when sewing the left side based on the right-side pattern: use function ?“Reverse sewing order” if the material position remains unchanged, or function ?“Reverse top and bottom feed” if the material is flipped upside down. (The differential amount must be readjusted.)
Stay focused on your hands
When sewing curves or making fine position adjustments, you can precisely control the height of the presser foot without taking your hands off the fabric.
Keep frequently used functions right at your fingertips
Freely assign any of 22 available functions (pattern step switching, etc.) to the three hand switches. Set the functions through simple touch panel control.
Automatic ruler alignment
The ruler position automatically shifts left or right to match the registered sewing width for each pattern number. Begin sewing immediately after switching patterns.
Three light colors and six brightness levels provide optimal visibility around the needle area for reduced eye fatigue.
| Model name | DX-01 |
|---|---|
| Specifications | Fully digital |
| Application | Medium-weight |
| Lubrication | Fully dry (JUKI Grease A applied only to the surface) |
| Maximum sewing speed | 4,000sti/min*1 |
| Feed method | Intermittent belt feed with a direct-drive stepping motor |
| Maximum stitch length / Maximum top feed amount | 9mm |
| Thread trimming method | Double-edge rotary system |
| Needle bar stroke | 30.7mm |
| Needle | DB×1(#11)#9~#14 DP × 5 (#11) #9~#14 (Compliant with European specifications) |
| Thread take-up | Link-type thread take-up lever |
| Hook(Pre-installed at the factory) | Dry hook |
| Presser foot lift amount | Auto presser lifter: 1st stage 8.0 mm (0.1 to 10.0 mm*2) 2nd stage 10.0 mm (2.0 to 13.5 mm*2) |
| Number of sewing patterns that can be stored | 99 patterns + 20 cycle patterns |
| (Polygonal stitching) Number of steps that can be stored | 30 steps |
| Hand switch | Standard with 3-button system (Factory settings: reverse feed stitching, one-touch changeover, one-stitch correction) |
| Maximum stitch length | 9mm |
| Soft-start function | Provided as standard |
| Automatic reverse feed stitching function | Provided as standard |
| Auto presser foot lifter device | Provided as standard (Motor type) |
| Bobbin thread winder | Built in the top of machine head (provided with a bobbin thread retaining plate) |
| JUKI Two-way communication function | Support through the USB • JUKI SMART App |
| Machine head size | 517 mm × 178 mm (Distance from needle to machine arm: 310 mm) |
| Machine head drive | Compact AC servomotor: 400W, directly connected to the main shaft (direct-drive system) |
| Power supply / Power consumption | 600VA |
| Net weight | 48.6Kg |
Stay in the loop with industrial cutting & sewing equipment
