AP-138 Turntable Manual Spreader by Apex
With Positive edge control, the turntable allows for face up one way, face to face nap one way, and face to face spreading. Standard size is from 48 inches to 72 inches, and has a 150 pound roll capacity.
- 1 1/4" frozen cloth bar with cones
- Standard machine size up to 72"
- Positive edge control
- Finger tip height control
- Machine size is 6" less than table size (i.e. 66" machine for 72" table)
Selecting available options
Determine if you need an additional lifter arm assembly. On a turn table, the top literally turns. If you have a corduroy, or another nap material, that requires face up spreading, you utilize the turntable to make that happen. A lifter arm on each side allows for more direct unwind during face-up spreading.
The Wheel Riser Kit attaches to the bottom of the frame to give more clearance and allows for higher spread heights.
The standard machine setup has track wheels on the operator side, and rubber wheels on the back side. For a table without a track, you will need outrigger wheels.